PENGARUH OVERHEATING TERHADAP TERJADINYA DISTORSI DAN HASIL RT PADA PENGELASAN GTAW UNTUK MATERIAL SOLID INCONEL UNS N06625
DOI:
https://doi.org/10.33556/jstm.v25i1.410Abstract
WPS has several parameters that determine heat input. This research was conducted to determine the welding results when the heat input used exceeds the value specified in the WPS used in the field. The research was carried out on 3 samples that have the same dimensions, namely 2" diameter with a thickness of 5.54 mm. The research method used was quantitative experimental. The weld results are checked visually
then continued with the NDT process in the form of RT. At each increase in heat input, there is a distortion of 4 mm and 1 number of RT weld defects in the heat input more than 10% WPS, distortion of 6 mm and 2 number of weld defects in the heat input more than 20% WPS, distortion 8 mm and 3 number of weld defects in the heat input more than 30 % WPS. The T test results show that overheating influences the occurance of distortion and RT results in GTAW welding. From the research results, it can be concluded that the higher the heat input used in the GTAW welding process for Inconel UNS N06625 material, the higher the distortion and number of weld defects in the welding results.
References
Anggraini, L., & Saputra, B. S. (2019). Sifat Mekanis Dan Struktur Mikro Pada
Sambungan Las Gesek Baja SCM415H Untuk Aplikasi Poros Roda Belakang.
Jurnal Rekayasa Mesin, 10(2), 177–184.
Https://Doi.Org/10.21776/Ub.Jrm.2019.010.02.9.
Arief,Wahyu.2020. Tegangan Dan Regangan Normal. https://www.academia. edu/
/Tegangan dan Regangan Normal. Diakses 10 Februari 2024.
Aryadi, G., Wibowo, A., Nugroho, C. B., & Aryswan, A. (2022). Pengujian Korosi
Intergranular Pada Material UNS 06625 Sesuai Standar ASTM G-28. Jurnal
Teknologi Dan Riset Terapan (JATRA), 4(2), 82–86.
Https://Doi.Org/10.30871/Jatra.V4i2.4930.
Dinov, K. . (2021). Analisa Pengaruh Variasi Heat Input Dengan Metode Pengelasan
SMAW Pada Material Baja Karbon S355J2N Dengan Pengujian Hardness Test. 10.
G.E Mathis Company. (2021). Understanding Gas Metal Arc Welding.
https://www.gemathis.com/understanding-gas-metal-arc-welding/, diakses tanggal
Januari 2024.
Hilmy, Z., Susilo, T., Adi, F. T., & ... (2024). Analisa Kesesuaian Masukan Heat Input
Pada Pengelasan Gtaw Untuk Material Solid Inconel Uns N06625. Jurnal Jalasena,
(2), 43–54.
Industri, F. T. (2019). Pengaruh Heat Input Dan Variasi Komposisi Shielding Gas
Terhadap Struktur Mikro Dan Sifat Mekanik Sambungan Baja Karbon Rendah Jis
G3101 Hasil Gas Metal Arc Welding ( Gmaw ) Sebagai Aplikasi Arm Excavator
Di Pt . X.
Musta, M., Siswanti, H., Mulananda, A., Teknik Bangunan Kapal, J., Negeri Madura
Sampang, P., & Timur, J. (2022). Pengaruh Variasi Heat Input Pada Pengelasan
Dissimillar Antara Baja Astm A36 Dan Astm A131 Terhadap Tensile Strength Dan
Struktur Makro. 12(2).
Octaviana Nurfitri. (2019). Studi Eksperimen Pengaruh Heatinput Pengelasan Gtaw Dan
Konsentrasi Naclo Terhadap Laju Korosi Stainless Steel 304.
Patti, T. S., Dasira, A., Prawira, M. Z., Putra, A. P., Studi, P., Perkapalan, T., Saintek,
F., & Karimun, U. (2024). Pengaruh Heating Torch Terhadap Temperature Dari
Permukaan Plat Tebal 8 Mm Grade Ah36 Dengan Plat 16 Mm Grade Ah36. 6(1),
–41.
Paul Rieder, P.Eng, R. H. (2024). What About Submerged Arc Welding. Canadian Metal
Working.https://www.canadianmetalworking.com/canadianindustrialmachinery/ar
ticle/welding/what-about-submerged-arc-welding, diakses tanggal 02 Februari
Rachmadani, A. F. (2019). Pengaruh Heat Input Pengelasan Gtaw Pada Stainless Steel
Terhadap Laju Korosi Di Media Sodium Hipoklorit Dengan Konsentrasi
Berbeda.
Radiographic Testing (RT) Radiographic Testing (RT) – Inspeksi NDT. (2024).
https://www.inspeksi.co.id/radiographic-testing-rt-inspeksi-ndt/, diakses tanggal
Februari 2024.
Savitri Ramadhani, 2022. Pengaruh Variasi Temperatur Preheat Pada Pengelasan SMAW
Terhadap Struktur Mikro Dan Kekerasan Baja Karbon SS400, 12-20.
Tank Welding LLC. (2021). Electrogas Welder. 27 Oktober.
https://tankwelding.com/electrogas-welder/, diakses 05 Februari 2024.
Teknik Las GTAW Teknik Las GTAW . I Teknik Las GTAW Ii | Teknik Las GTAW.
(N.D.). Diakses 10 Februari 2024.
Teknologi, J., Psl, X., Engelasan, H. A. P., Ariyanto, N. P., Wibowo, A., Rossbandrio,
W., Widiastuti, H., & Kamsyah, D. (2023). Pengujian M Ekanis Dan Korosi Pada
Weld Overlay P IPA API 5L. 5(1), 21–26.
Trisno Susilo, Larifa’I, & Andrew Pradana. (2021). Analisa efek thermal pengelasan
FCAW terhadap Deformasi Dengan Variasi Posisi Pengelasan dan Ketebalan Plate
Pada Pelat EH 36 Untuk Stool Support. Jurnal Jalasena, 3(1), 1–7.
https://doi.org/10.51742/jalasena.v3i1.364.
Widyianto, A., Sunar Baskoro, A., Kiswanto, G., Fathin, M., & Ganeswara, G. (2021).
Analisis Pengaruh Arus Pengelasan Dan Urutan Pengelasan Pada Pengelasan Pipa
Orbital Terhadap Lebar Manik Las Dan Distorsi Pada Pipa Baja Tahan Karat 316L.
Jurnal Teknik Mesin Indonesia, 16(1), 52–60.
Yunus. (2021). Pengaruh Variasi Arus Dan Kecepatan Aliran Gas Pelindung Pada
Pengelasan Material Ss-304 Menggunakan Las Tig Terhadap Kekuatan Tarik Dan
Struktur Mikro. Jtm, 09(01), 145–150.
Zaki Mahbub, M. (2023). Pengaruh Masukan Panas Terhadap Distorsi Dan Sifat Mekanik
Pada Pengelasan Dissimilar Baja AISI 304. Jurnal Ilmiah Teknik Mesin, 11(1), 24–
Http://Ejournal.Unismabekasi.Ac.Id.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
